Fleet Vehicle Inspection Coeur D Alene ID

This page provides relevant content and local businesses that can help with your search for information on Fleet Vehicle Inspection. You will find informative articles about Fleet Vehicle Inspection, including "Driveline inspection procedures", "Inspections, lubrication are keys to lift maintenance", and "Inspect vehicle lifts". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Coeur D Alene, ID that can help answer your questions about Fleet Vehicle Inspection.

A & B Motors
(509) 343-7507
18405 East Apple Way Ave
Green Acres, WA
Hours
Monday 8:00 AM - 5:30 PM
Tuesday 8:00 AM - 5:30 PM
Wednesday 8:00 AM - 5:30 PM
Thursday 8:00 AM - 5:30 PM
Friday 8:00 AM - 5:30 PM
Saturday Closed
Sunday Closed
Memberships and Certifications
Certifications : ASA, ASE
Services
Air Conditioning/Heating, Alternator, Battery, Belts & Hoses, Catalytic Converter, Clutch Cylinder, Cooling System, Diagnostics, Drive Belt, Electrical System, Exhaust Systems, Filters & Fluids, Fuel Injector, Fuel Pump, Fuel System, Head Gasket, Headlight/Headlamp, High Performance Service, Ignition, Inspection, Muffler, Oil Pan, Oil Pump, Oxygen Sensor, Parts, Radiator, Restoration Service, Shocks & Struts, Spark Plugs, Starter, Thermostat, Timing Belt, Tune-Up, Water Pump, Window Motor, Windo
Service Types and Repair
Acura, Aston Martin, Audi, Auto Clutch, Auto Drivetrain, Auto Engine, Auto Interior, Auto, Bentley, BMW, Buick, Cadillac, Chevrolet, Chrysler, Classic Car, Diesel Engine, Dodge, Emergency Auto, Exotic Car, Fiat, Ford, GMC, Harley Davidson, Honda, Hyundai, Infiniti, Isuzu, Jaguar, Jeep, Kia, Land Rover, Lexus, Lincoln, Lotus, Mazda, Mercedes Benz, Mitsubishi, Motorcycle/ATV, Nissan, Oldsmobile, Pontiac, Porsche, RV/Bus, Saab, Saturn, Small Engine, Subaru, Suzuki, Toyota, Truck, Volkswagen, Volvo

Bollers Automotive
(208) 664-9319
1148 N 4th St
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Wheel Alignment
Hours
Mon:8:00 am-5:30 pm
Tue:8:00 am-5:30 pm
Wed:8:00 am-5:30 pm
Thu:8:00 am-5:30 pm
Fri:8:00 am-5:30 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Credit Card

Cook's Automotive
(208) 667-0957
904 N 3rd St
Coeur D Alene, ID
Specialty
Inspection & Diagnostic
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Check, Credit Card

Auto Shack
(208) 667-9152
1400 E Best Ave
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Radiator Repair, Wheel Alignment
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Credit Card

Tom Addis Dodge Inc
(208) 664-4000
314 Clayton Ave
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Wheel Alignment
Hours
Mon:7:00 am-5:00 pm
Tue:7:00 am-5:00 pm
Wed:7:00 am-5:00 pm
Thu:7:00 am-5:00 pm
Fri:7:00 am-5:00 pm
Sat:8:00 am-5:00 pm
Sun:(Closed)
Payment
Cash, Credit Card

Computune Auto Repair
(208) 664-6400
1425 East Sherman Ave
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Wheel Alignment
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Check, Credit Card

Autohaus Europa
(509) 455-8485
1525 Northwest Blvd, ,
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Wheel Alignment
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Credit Card

Coeur D'Alene Honda
(208) 765-5005
2785 Seltice Way
Coeur D Alene, ID
Specialty
Air Conditioning Repair, Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Maintenance, Paint & Body Work, Tires/Wheels, Transmission, Upholstery, Wheel Alignment
Hours
Mon:8:00 am-6:00 pm
Tue:8:00 am-6:00 pm
Wed:8:00 am-6:00 pm
Thu:8:00 am-6:00 pm
Fri:8:00 am-6:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Check, Credit Card

Alton's Automotive Center Inc
(208) 765-7777
200 W Appleway Ave
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Wheel Alignment
Hours
Mon:7:00 am-6:00 pm
Tue:7:00 am-6:00 pm
Wed:7:00 am-6:00 pm
Thu:7:00 am-6:00 pm
Fri:7:00 am-6:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Credit Card

European Machine
(208) 667-3163
2955 N Government Way
Coeur D Alene, ID
Specialty
Brakes, Electrical Service, Emission Testing, Engine Repair, Exhaust Repair, Front End Repair, General Automotive Repair, Inspection & Diagnostic, Lubrication Service, Machine Shop Service, Maintenance, Radiator Repair, Wheel Alignment
Hours
Mon:8:00 am-5:00 pm
Tue:8:00 am-5:00 pm
Wed:8:00 am-5:00 pm
Thu:8:00 am-5:00 pm
Fri:8:00 am-5:00 pm
Sat:(Closed)
Sun:(Closed)
Payment
Cash, Credit Card

Driveline inspection procedures

ArvinMeritor offers these suggestions to keep your drive shaft and U-joints functioning properly:

1. Check for excess tolerances before lubing application. Lube may mask, or hide excessive play and tolerances.

2. U-Joint maximum end play is .006 in.; more than that will result in failure.

3. Slip movement, up and down, maximum allowance is .017 in.; more than that will result in failure.

4. Dents, missing weights, dirt and foreign material buildup on shaft can cause vibration and balance issues, resulting in failure that can also cause damage to transmission and axle.

5. Determine type of bearings. Center bearings, new self-aligning style, have gold colored collar without deflectors. Self-align style became available in 2002 and will allow +/- 5° angle of deflection.

6. Know your driveshaft: Driveshaft standard slip application has splines that face the power source and end yoke. Driveshaft outboard slip assembly has splines that face toward rear of application.

7. Phasing: mark slip position with paint stripe during disassembly to make sure that you reassemble it in the same position and phasing to avoid timing and vibration issues.

8. Lubrication basic procedures: U-joints –– make sure that grease purges at all four seals to ensure that old grease does not contaminate new grease or create potential chemical incompatibility. For slip splines, 6 to 8 pumps from the grease gun are acceptable.

9. Refer to maintenance manu...

Click here to read more from Fleet Equipment

Inspect vehicle lifts

Rotary Lift urges technicians and maintenance managers to inspect their lifts. “Maintaining a safe, efficient repair shop is everyone’s responsibility,” says John Rylee, director of marketing. “Technicians should check lifts every day, and the fleet maintenance manager should schedule professional inspections annually. Regular inspections help ensure all the lifts in the shop are operating properly.”

The Automotive Lift Institute (ALI) also recommends all lifts be inspected by a qualified lift inspector at least annually, “to ensure reliability and the continued safe operation of the lift.”

The owner’s manual will provide inspection instructions for a specific lift. General guidelines are also available from the Lifting It Right safety manual published by ALI, and ANSI/ALI ALOIM:2008, the industry standard that outlines safety requirements for lift operation, inspection and maintenance. Both publications are available from ALI members (including Rotary Lift) and their distributors, as well as at www.autolift.org .

At a minimum, technicians should check the following daily:

Lift controls, as well as all locks and restraints, are working correctly. There is no deformation or excessive wear of any lift components, including posts, arms, hoses or wiring. There is no damage or excessive wear on any of the lift contact points, including adapters. There are no hydraulic leaks, cracks or loose concrete around floor anchors.

If any of these problems exist, or if the lift makes unusual noises or sudden movements, operates erratically, or creates chips or filings during use, the technician should stop using the lift and report the condition to a supervisor immediately so the lift can be repaired by factory-trained service personnel.

Rotary Lift has extended its Inspect to Protect program to help maintenance managers find local qualified lift inspectors through the Rotary Authorized Installer (RAI) N...

Click here to read more from Fleet Equipment

Inspections, lubrication are keys to lift maintenance

Lifts provide access to vehicles, enabling technicians to get more work done in less time, to maximize productivity and profitability. Proper lift maintenance practices will help provide a long service life.

To keep vehicle lifts operating properly, good maintenance and inspection practices are crucial. Rotary Lift offers the following advice:

• Read and follow the guidelines in your lift owner's manual. Maintenance and inspection requirements vary for different styles and brands of vehicle lifts. The owner's manual will cover the specific needs of each lift.

• Schedule annual inspections for all vehicle lifts. A factory-authorized technician should perform the inspection. Lift manufacturers can recommend authorized service companies in your area.

• Keep lifts well lubricated, according to manufacturers' guidelines.

• Whether maintenance is performed in-house or by an outside service company, insist on genuine OE replacement parts. OE parts were designed by the lift manufacturer to original design specifications. Aftermarket parts are reverse-engineered and may not use the same materials or incorporate the latest design changes, according to Rotary Lift. The Automotive Lift Institute (ALI) recommends using OE parts to ensure proper fit and function. Using aftermarket parts on an ALI-certified lift may void that lift's certification.

ALI offers general lift maintenance and inspection guidelines in a variety of materials, inclu...

Click here to read more from Fleet Equipment

© Copyright 2011 Babcox Media, Inc. All Rights Reserved
3550 Embassy Parkway, Akron, OH 44333
330-670-1234
(FAX) 330-670-0874